ARCOM

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 126 results ...

Abdessalem, J, Fakhreddine, D, Said, A and Mohamed, H (2014) Shape optimization for a hyperelastic axisymmetric structure. Journal of Engineering, Design and Technology, 12(02), 177-94.

Addy, M, Adinyira, E and Ayarkwa, J (2018) Antecedents of building information modelling adoption among quantity surveyors in Ghana. Journal of Engineering, Design and Technology, 16(02), 313–26.

Agyefi-Mensah, S, Post, J, van Egmond, E, Badu, E and Mohammadi, M (2015) The need for post-occupancy evaluation of public apartment buildings in Ghana. Journal of Engineering, Design and Technology, 13(02), 315-33.

Akampurira, E and Windapo, A (2019) Key quality attributes of design documentation: South African perspective. Journal of Engineering, Design and Technology, 17(02), 362–82.

Ali, F, Chowdary, B V and Gonzales, L (2013) An integrated design approach for rapid product development: A case study through application of reverse engineering, re-engineering and fast prototyping tools. Journal of Engineering, Design and Technology, 11(02), 178-89.

Alluqmani, A E (2014) Design and behaviour of R.C. beams to ACI318-and-SBC304; and EC2 codes when subjected to asymmetric loading. Journal of Engineering, Design and Technology, 12(02), 158-76.

Almazrouei, M, Khalid, K, Abdallah, S and Davidson, R (2019) Assessing the health, safety, and environment culture in the United Arab Emirates oil and gas industry. Journal of Engineering, Design and Technology , 18(02), 495–512.

Arif, A A and Karam, A H (2005) Architectural practices and IT: local vs international. Journal of Engineering, Design and Technology, 3(02), 155–63.

Arif, M, Egbu, C, Haleem, A, Kulonda, D and Khalfan, M (2009) State of green construction in India: drivers and challenges. Journal of Engineering, Design and Technology, 7(02), 223–34.

Ashcroft, D, Egbelakin, T, Jing, J and Rasheed, E O (2019) Cost comparison of seismic damage resisting systems for modules in multi-storey buildings. Journal of Engineering, Design and Technology, 17(02), 330–46.

Awodele, O A, Aghimien, D O, Akinkunmi, O G and Aigbavboa, C O (2019) Labour-only procurement. Journal of Engineering, Design and Technology, 17(02), 347–61.

Ayadi, A, Nasraoui, H, Driss, Z, Bouabidi, A and Abid, M S (2018) Unsteady state of a solar chimney power plant accoupled with a turbine: case study. Journal of Engineering, Design and Technology, 16(02), 244–55.

Barari, A, Ganjavi, B, Jeloudar, M G and Domairry, G (2010) Assessment of two analytical methods in solving the linear and nonlinear elastic beam deformation problems. Journal of Engineering, Design and Technology, 8(02), 127–45.

Bowen, P, Cattell, K, Michell, K and Edwards, P (2008) Job satisfaction of South Africa quantity surveyors: Are employers happier than employees?. Journal of Engineering, Design and Technology, 6(02), 124–44.

Bulsara, M A, Hingu, A D and Vaghasiya, P S (2016) Energy loss due to unbalance in rotor–shaft system. Journal of Engineering, Design and Technology, 14(02), 277-85.

Chan, A P C, Wong, J M W and Chiang, Y H (2003) Modelling Labour Demand at Project Level — An Empirical Study in Hong Kong. Journal of Engineering, Design and Technology, 1(02), 135–50.

Chileshe, N and Dzisi, E (2012) Benefits and barriers of construction health and safety management (HSM): Perceptions of practitioners within design organisations. Journal of Engineering, Design and Technology, 10(02), 276-98.

Chileshe, N and Haupt, T C (2010) An empirical analysis of factors impacting career decisions in South African construction industry: Male and female high school students' perspectives. Journal of Engineering, Design and Technology, 8(02), 221–39.

Chileshe, N and Haupt, T C (2005) Modelling critical success factors of construction project management (CPM). Journal of Engineering, Design and Technology, 3(02), 140–54.

Chow, W K and Chan, L Y (2011) Possibility of using water mist fire suppression system in Hong Kong. Journal of Engineering, Design and Technology, 9(02), 157–63.

Collinge, W H (2017) Client requirement representations and transformations in construction project design. Journal of Engineering, Design and Technology, 15(02), 222-41.

Ding, Z, Ng, F and Wang, J (2014) Testing trust scale measurement invariance in project teams. Journal of Engineering, Design and Technology, 12(02), 209-22.

Edwards, D J and Holt, G D (2009) Construction plant and equipment management research: thematic review. Journal of Engineering, Design and Technology, 7(02), 186–206.

Edwards, D J, Cabahug, R R and Nicholas, J (2003) The Impact of Training and Education Characteristics Upon Plant Operator Maintenance Proficiency. Journal of Engineering, Design and Technology, 1(02), 119–34.

Edwards, D J, Yang, J, Wright, B C and Love, P E D (2007) Establishing the link between plant operator performance and personal motivation. Journal of Engineering, Design and Technology, 5(02), 173–87.

El-Medany, W M (2014) A cost-effective programmable SoC for network security using Xilinx Spartan 3AN FPGA. Journal of Engineering, Design and Technology, 12(02), 280-91.

Emmitt, S (2005) Integrating teaching and research in an architectural technology undergraduate model. Journal of Engineering, Design and Technology, 3(02), 164–79.

Emuze, F, Smallwood, J and Han, S (2014) Factors contributing to non-value adding activities in South African construction. Journal of Engineering, Design and Technology, 12(02), 223-43.

Fadiya, O, Georgakis, P, Chinyio, E and Nwagboso, C (2015) Decision-making framework for selecting ICT-based construction logistics systems. Journal of Engineering, Design and Technology, 13(02), 260-81.

Famiyeh, S, Amoatey, C T, Adaku, E and Agbenohevi, C S (2017) Major causes of construction time and cost overruns: A case of selected educational sector projects in Ghana. Journal of Engineering, Design and Technology, 15(02), 181-98.

Ganah, A A (2003) The Use of Computer Visualisation in Communicating Constructability Information in UK. Journal of Engineering, Design and Technology, 1(02), 151–67.

Ghiasi, V, Ghiasi, S and Prasad, A (2012) Evaluation of tunnels under squeezing rock condition. Journal of Engineering, Design and Technology, 10(02), 168-79.

Goyal, S, Routroy, S and Singhal, A (2019) Analyzing environment sustainability enablers using fuzzy DEMATEL for an Indian steel manufacturing company. Journal of Engineering, Design and Technology, 17(02), 300–29.

Griffin, B and Yang, J (2013) Design and analysis of a novel earpiece-less eyeglass frame. Journal of Engineering, Design and Technology, 11(02), 158-77.

Habibeh Valizadeh, A and Husaini b, O (2011) Overview of remote sensing techniques in earthquake prediction. Journal of Engineering, Design and Technology, 9(02), 164–77.

Hassan, A, Purnomo, M R A and Anugerah, A R (2019) Fuzzy-analytical-hierarchy process in failure mode and effect analysis (FMEA) to identify process failure in the warehouse of a cement industry. Journal of Engineering, Design and Technology , 18(02), 378–88.

Hassan, O A B and Anderstedt, R (2017) Estimation of drying time of fresh concrete slabs: a comparative study. Journal of Engineering, Design and Technology, 15(02), 134-48.

Haupt, T C and Pillay, K (2016) Investigating the true costs of construction accidents. Journal of Engineering, Design and Technology, 14(02), 373-419.

Hendrickse, C and Thurner, T W (2019) Design intervention at major technological installations. Journal of Engineering, Design and Technology, 17(02), 402–13.

Holt, G D and Goulding, J S (2014) Conceptualisation of ambiguous-mixed-methods within building and construction research. Journal of Engineering, Design and Technology, 12(02), 244-62.

Huang, J-Y and Siao, S-T (2016) Development of an integrated bionic design system. Journal of Engineering, Design and Technology, 14(02), 310-27.

Huang, W, Xu, J, Zhu, D, Liu, C, Lu, J and Lu, K (2016) Multi-objective optimization of composite two-stage vibration isolation system for sensitive equipment. Journal of Engineering, Design and Technology, 14(02), 343-61.

Ibrahim, Y M, Ibrahim, A M and Kabir, B (2009) Geographic diversification, performance, and the risk profile of UK construction firms. Journal of Engineering, Design and Technology, 7(02), 171–85.

Ikediashi, D I and Ogwueleka, A C (2016) Assessing the use of ICT systems and their impact on construction project performance in the Nigerian construction industry. Journal of Engineering, Design and Technology, 14(02), 252-76.

Ismaila, S O and Samuel, T M (2014) Human-centered engineering: the challenges of Nigerian engineer. Journal of Engineering, Design and Technology, 12(02), 195-208.

Jaafar, M and Aziz, A R A (2008) Entrepreneurship education in developing country: Exploration on its necessity in the construction programme. Journal of Engineering, Design and Technology, 6(02), 178–89.

Jayaram, S (2010) Design of template to fabricate magnetic torquer coils for nano and picosatellite missions. Journal of Engineering, Design and Technology, 8(02), 158–67.

Jr, A C L and Melhado, S B (2014) Scope of design for production of wall partitions. Journal of Engineering, Design and Technology, 12(02), 263-79.

Kakitahi, J M, Alinaitwe, H M, Landin, A and Mone, S J (2016) Impact of construction-related rework on selected Ugandan public projects. Journal of Engineering, Design and Technology, 14(02), 238-51.

Kamal, E M and Flanagan, R (2012) Understanding absorptive capacity in Malaysian small and medium sized (SME) construction companies. Journal of Engineering, Design and Technology, 10(02), 180-98.

Karimi, H, Danesh Ashtiani, H A and Aghanajafi, C (2019) Study of mixed materials heat exchanger using optimization techniques. Journal of Engineering, Design and Technology, 17(02), 414–33.

Khalaf, A B, Hamam, Y, Alayli, Y and Djouani, K (2013) The effect of maintenance on the survival of medical equipment. Journal of Engineering, Design and Technology, 11(02), 142-57.

Khatib, J M, Chileshe, N and Sloan, S (2007) Antecedents and benefits of 3D and 4D modelling for construction planners. Journal of Engineering, Design and Technology, 5(02), 159–72.

Khorshid, E, Alfadli, A and Falah, A (2018) Application of constraint infeasibility detection methods in engineering design problems. Journal of Engineering, Design and Technology, 16(02), 285–312.

Kim, W-S, Tam, N M and Jung, D-H (2005) Experimental study on strength of cement stabilized clay. Journal of Engineering, Design and Technology, 3(02), 116–26.

Kwofie, T E, Aigbavboa, C O and Thwala, W D (2019) Measures to improve the adoption of life cycle assessment in the South African construction industry. Journal of Engineering, Design and Technology , 18(02), 480–94.

Lam, P T I, Wong, F K W and Wong, F W H (2007) Building features and site-specific factors affecting buildability in Hong Kong. Journal of Engineering, Design and Technology, 5(02), 129–47.

Liu, Y, Zhao, J, Dimitrov, V, Irish, A, Jones, C, Kirk, S, Thomas, J and Welter, D (2010) An entertaining robot prototype for pets. Journal of Engineering, Design and Technology, 8(02), 189–205.

Machika, P (2007) Access to success: The value of bridging programmes in engineering at the University of Johannesburg. Journal of Engineering, Design and Technology, 5(02), 120–8.

Madhlopa, A (2016) Effect of controlling airflow in a solar chimney on thermal load in a built environment. Journal of Engineering, Design and Technology, 14(02), 286-309.

Mañelele, I and Muya, M (2008) Risk identification on community-based construction projects in Zambia. Journal of Engineering, Design and Technology, 6(02), 145–61.

Manthe, M and Smallwood, J (2007) The appropriateness of built environment tertiary education: Perspectives of academics and postgraduate students. Journal of Engineering, Design and Technology, 5(02), 102–19.

Marinelli, M and Salopek, M (2019) Joint risk management and collaborative ethos. Journal of Engineering, Design and Technology , 18(02), 343–61.

Mathews, M (2013) BIM collaboration in student architectural technologist learning. Journal of Engineering, Design and Technology, 11(02), 190-206.

Mellal, L and Djebabra, M (2015) Contribution of cost-benefit analysis to optimization of eco-design plants. Journal of Engineering, Design and Technology, 13(02), 334-46.

Miller, S, Haupt, T C and Chileshe, N (2005) Student perceptions of the first year civil engineering course content. Journal of Engineering, Design and Technology, 3(02), 180–9.

Mostafaeipour, A, Qolipour, M, Rezaei, M and Goudarzi, H (2019) Techno-economic assessment of using wind power system for tribal region of Gachsaran in Iran. Journal of Engineering, Design and Technology , 18(02), 293–307.

Murphy, M E, Perera, R S and Heaney, S G (2008) Building design innovation: Expansion of classification linkages through case study analysis. Journal of Engineering, Design and Technology, 6(02), 99–111.

Murphy, M E, Perera, R S and Heaney, S G (2008) Building design innovation: Expansion of classification linkages through case study analysis. Journal of Engineering, Design and Technology, 6(02), 99–111.

Navarro-Astor, E, Román-Onsalo, M and Infante-Perea, M (2017) Women’s career development in the construction industry across 15 years: main barriers. Journal of Engineering, Design and Technology, 15(02), 199-221.

Nzekwe-Excel, C, Nwagboso, C, Georgakis, P and Proverbs, D (2010) Integrated framework for satisfaction assessment in construction sector. Journal of Engineering, Design and Technology, 8(02), 168–88.

Oduori, M and Mbuya, T (2009) Wire rope selection for manual winch application. Journal of Engineering, Design and Technology, 7(02), 207–22.

Oduori, M F, Mutuli, S M and Munyasi, D M (2015) Analysis of the single toggle jaw crusher kinematics. Journal of Engineering, Design and Technology, 13(02), 213-39.

Ogbu, C P and Adindu, C C (2019) Direct risk factors and cost performance of road projects in developing countries. Journal of Engineering, Design and Technology , 18(02), 326–42.

Ogunyanda, K, Fritz, W and van Zyl, R (2015) PSIM simulations of a DC SQUID magnetometer. Journal of Engineering, Design and Technology, 13(02), 298-314.

Ojolo, S J, Damisa, O, Orisaleye, J I and Ogbonnaya, C (2010) Design and development of cashew nut shelling machine. Journal of Engineering, Design and Technology, 8(02), 146–57.

Oke, A E and Aghimien, D O (2018) Drivers of value management in the Nigerian construction industry. Journal of Engineering, Design and Technology, 16(02), 270–84.

Olabanji, O M and Mpofu, K (2019) Adopting hybridized multicriteria decision model as a decision tool in engineering design. Journal of Engineering, Design and Technology , 18(02), 451–79.

Oloke, D A, Edwards, D J and Thorpe, T A (2003) Predicting Construction Plant Breakdown Time Using Time Series Modelling. Journal of Engineering, Design and Technology, 1(02), 202–21.

Omar, I and Mncwango, S (2005) Sanitary landfill energy harnessing and applications. Journal of Engineering, Design and Technology, 3(02), 127–39.

Omopariola, E D, Windapo, A, Edwards, D J and Thwala, W D (2019) Contractors’ perceptions of the effects of cash flow on construction projects. Journal of Engineering, Design and Technology , 18(02), 308–25.

Onitiri, M A and Adedayo, S M (2015) Compressive behaviour of polypropylene filled with iron ore tailings. Journal of Engineering, Design and Technology, 13(02), 198-212.

Opoku, A and Mills, S A (2019) Exploring the use of standardised design in addressing the shortage of primary school places in the UK. Journal of Engineering, Design and Technology, 17(02), 383–401.

Othman, A A E and Abdelrahim, S M (2019) Achieving sustainability through reducing construction waste during the design process. Journal of Engineering, Design and Technology, 18(02), 362–77.

Owusu-Manu, D-G, Edwards, D J, Kutin-Mensah, E K, Kilby, A, Parn, E and Love, P E (2017) The impact of socio-political and economic environments on private sector participation in energy infrastructure delivery in Ghana. Journal of Engineering, Design and Technology, 15(02), 166-80.

Owusu-Manu, D, John Edwards, D, Pärn, E A, Antwi-Afari, M F and Aigbavboa, C (2018) The knowledge enablers of knowledge transfer: a study in the construction industries in Ghana. Journal of Engineering, Design and Technology, 16(02), 194–210.

Oyedele, L O, Tham, K W, Jaiyeoba, B E and Fadeyi, M O (2003) Model for Predicting Architect's Performance in Building Delivery Process. Journal of Engineering, Design and Technology, 1(02), 168–86.

Oyewobi, L O, Abiola-Falemu, O and Ibironke, O T (2016) The impact of rework and organisational culture on project delivery. Journal of Engineering, Design and Technology, 14(02), 214-37.

Peltola, T and Mansikkamaki, P (2007) Formable multilayer PCB structure: design and technology demonstrator. Journal of Engineering, Design and Technology, 5(02), 148–58.

Rani, S P J V and Prabha, K A (2010) Stochastic logic computation based RBFNN with adaptive hidden layer structure. Journal of Engineering, Design and Technology, 8(02), 206–20.

Reda, R, Saad, M, Ahmed, M Z and Abd-Elkader, H (2018) Monitoring joint quality: Taguchi approach and structure investigation. Journal of Engineering, Design and Technology, 16(02), 211–32.

Rethinam, A, Shivakumar, V D, Harish, L, Abhishek, M B, Ramana, G V, Madhusudana, R, Sah, R and Manjini, S (2015) Grain refinement of C-Mn steel through thermo-mechanical processing. Journal of Engineering, Design and Technology, 13(02), 282-97.

Robin, C (2011) Today's pupils, tomorrow's engineers! Pedagogy and policy: a UK perspective. Journal of Engineering, Design and Technology, 9(02), 227–41.

Sacks, A, Nisbet, A, Ross, J and Harinarain, N (2012) Life cycle cost analysis: a case study of Lincoln on the Lake. Journal of Engineering, Design and Technology, 10(02), 228-54.

Sastry, M K S and Seekumar, L (2012) Automation of real time monitoring and controlling of a marine loading arm. Journal of Engineering, Design and Technology, 10(02), 217-27.

Shafabakhsh, G A, Kashi, E and Akbari, A (2016) A comparison effect of aircraft main gear configuration on runway damages by LED and FE method. Journal of Engineering, Design and Technology, 14(02), 362-72.

Shafabakhsh, G, Kashi, E and Tahani, M (2018) Analysis of runway pavement response under aircraft moving load by FEM. Journal of Engineering, Design and Technology, 16(02), 233–43.

Simpson, K B and Sam, A (2019) Strategies for health and safety management in Ghana. Journal of Engineering, Design and Technology , 18(02), 431–50.

Singh, K K and Sinha, M K (2017) Optimization of design parameters in a cylindrical heat sink with branched fins under natural convection. Journal of Engineering, Design and Technology, 15(02), 242-53.

So, C (2017) Intuitive design: framing a software test system as a status reporting tool for business. Journal of Engineering, Design and Technology, 15(02), 149-65.

Stanley, F and Thabani, M (2011) Application of RCM for a chipping and sawing mill. Journal of Engineering, Design and Technology, 9(02), 204–26.

Stopforth, R, Proctor-Parker, C and Davrajh, S (2019) Analysis of a low-cost anthropomorphic sensory platform for the world first minibus test. Journal of Engineering, Design and Technology, 17(02), 434–55.

Styhre, A (2019) The invention of the shopping mall. Journal of Engineering, Design and Technology, 17(02), 283–99.

Styhre, A, Wikmalm, L, Ollila, S and Roth, J (2012) Sociomaterial practices in engineering work: The backtalk of materials and the tinkering of resources. Journal of Engineering, Design and Technology, 10(02), 151-67.

• Type: Journal Article
• Keywords: electrical engineering; engineering; innovation; innovation work; materials; resources; sociomaterial practice
• ISBN/ISSN: 1726-0531
• URL: https://doi.org/10.1108/17260531211241158
• Abstract:
  Purpose - Engineering work is a specific form of sociomaterial practice, drawing on and combining social and material resources to accomplish desirable effects, often combining technological and social resources. A study of an electrical engineering development project suggests that the work unfolds as a process whereby technological artefacts are verified on the basis of testing procedures and whereby events concerning technological failure, what has been called the "back-talk" of technology, are handled using joint problem-solving. The purpose of this paper is to report on a study of a new product development project at a multinational telecommunications company. Design/methodology/approach - An ethnographic case study of a new product development project at a major multinational telecommunications company was undertaken. Findings - Engineering work is based on distributed know-how and joint collaborations, emerging as a patchwork of activities where one single person may know a lot, but not everything, about the technology-in-the-making. The paper concludes that joint concern for the technology, manifested as its gradual advancement, is what serves as the glue holding the community of engineers together. Originality/value - The paper presents an original study of the work of a team of electrical engineers and inquires into how engineers combine technical and social resources when attempting to make the technology work.

Sunday, J O, Olatunde, D and Oluwatoyin, I (2011) Investigation into the effects of solid lubricant on the surface characteristics of some metals during orthogonal machining. Journal of Engineering, Design and Technology, 9(02), 130–42.

Sutton, K, Williams, A, Tremain, D and Kilgour, P (2016) University entry score: Is it a consideration for spatial performance in architecture design students?. Journal of Engineering, Design and Technology, 14(02), 328-42.

Swallow, M and Zulu, S (2019) Students’ awareness and perception of the value of BIM and 4D for site health and safety management. Journal of Engineering, Design and Technology , 18(02), 414–30.

Tam, V W Y and Le, K N (2008) On using the Gaussian and hyperbolic distributions to improve quality in construction. Journal of Engineering, Design and Technology, 6(02), 112–23.

Tangwe, S l and Simon, M (2019) Quantification of the viability of residential air source heat pump water heaters as potential replacement for geysers in South Africa. Journal of Engineering, Design and Technology, 17(02), 456–70.

Trethewy, R W (2005) The effect of feedback on risk taking in the Australian construction industry. Journal of Engineering, Design and Technology, 3(02), 109–15.

Trethewy, R W and Atkinson, M (2003) Enhanced Safety, Health and Environment Outcomes Through Improved Design. Journal of Engineering, Design and Technology, 1(02), 187–201.

Verwey, I (2008) Women helping women: outcomes of a South African pilot project. Journal of Engineering, Design and Technology, 6(02), 162–77.

Vinodh, S and Aravindraj, S (2012) Axiomatic modeling of lean manufacturing system. Journal of Engineering, Design and Technology, 10(02), 199-216.

Vinodh, S and Ravikumar, R (2012) Application of probabilistic finite element analysis for crane hook design. Journal of Engineering, Design and Technology, 10(02), 255-75.

Vinodh, S, Arvind, K R and Rajanayagam, D (2011) Development of digital product catalogue for enabling agility in a manufacturing organisation. Journal of Engineering, Design and Technology, 9(02), 143–56.

Vinodh, S, Somanaathan, M and Arvind, K R (2013) Development of value stream map for achieving leanness in a manufacturing organization. Journal of Engineering, Design and Technology, 11(02), 129-41.

Vinodh, S, Sundararaj, G, Devadasan, S R, Kuttalingam, D, Jayaprakasam, J and Rajanayagam, D (2009) Agility through the interfacing of CAD and CAM. Journal of Engineering, Design and Technology, 7(02), 143–70.

Wang, L (2018) The fuzzy in evaluation of concrete structure engineering. Journal of Engineering, Design and Technology, 16(02), 327–38.

Witmer, A (2019) An ethnographic justification for establishment of a contextual engineering discipline. Journal of Engineering, Design and Technology , 18(02), 389–413.

Wong, F K W, Chan, A P C, Yam, M C H, Wong, E Y S, Tse, K T C, Yip, K K C and Cheung, E (2009) Findings from a research study of construction safety in Hong Kong: Accidents related to fall of person from height. Journal of Engineering, Design and Technology, 7(02), 130–42.

Yan, L and Fu-Yan, L (2017) Investigation on influence of speed on rolling resistance of belt conveyor based on viscoelastic property of rubber. Journal of Engineering, Design and Technology, 15(02), 254-67.

Yirenkyi-Fianko, A B and Chileshe, N (2015) An analysis of risk management in practice: the case of Ghana’s construction industry. Journal of Engineering, Design and Technology, 13(02), 240-59.

Zainab, R, David, J E, Gary, D H and Tony, T (2011) Data flow analysis of plant and equipment health and safety management. Journal of Engineering, Design and Technology, 9(02), 178–203.

Zheng, P and Dai, G (2013) A comparative study on static properties of a three-main-truss and three-cable-plane cable-stayed bridge. Journal of Engineering, Design and Technology, 11(02), 207-20.

Zhou, B, Xue, Y, Li, M, Li, Z, Zhang, X and Tao, Y (2018) Longitudinal jet ventilation calculation and application of long highway tunnel. Journal of Engineering, Design and Technology, 16(02), 256–69.

Zulu, S and Muleya, F (2019) A student perspective of ethics in the Zambian construction industry. Journal of Engineering, Design and Technology, 17(02), 266–82.