Abstracts – Browse Results

Search or browse again.

Click on the titles below to expand the information about each abstract.
Viewing 126 results ...

Abdessalem, J, Fakhreddine, D, Said, A and Mohamed, H (2014) Shape optimization for a hyperelastic axisymmetric structure. Journal of Engineering, Design and Technology, 12(02), 177-94.

Addy, M, Adinyira, E and Ayarkwa, J (2018) Antecedents of building information modelling adoption among quantity surveyors in Ghana. Journal of Engineering, Design and Technology, 16(02), 313–26.

Agyefi-Mensah, S, Post, J, van Egmond, E, Badu, E and Mohammadi, M (2015) The need for post-occupancy evaluation of public apartment buildings in Ghana. Journal of Engineering, Design and Technology, 13(02), 315-33.

Akampurira, E and Windapo, A (2019) Key quality attributes of design documentation: South African perspective. Journal of Engineering, Design and Technology, 17(02), 362–82.

Ali, F, Chowdary, B V and Gonzales, L (2013) An integrated design approach for rapid product development: A case study through application of reverse engineering, re-engineering and fast prototyping tools. Journal of Engineering, Design and Technology, 11(02), 178-89.

Alluqmani, A E (2014) Design and behaviour of R.C. beams to ACI318-and-SBC304; and EC2 codes when subjected to asymmetric loading. Journal of Engineering, Design and Technology, 12(02), 158-76.

Almazrouei, M, Khalid, K, Abdallah, S and Davidson, R (2019) Assessing the health, safety, and environment culture in the United Arab Emirates oil and gas industry. Journal of Engineering, Design and Technology , 18(02), 495–512.

Arif, A A and Karam, A H (2005) Architectural practices and IT: local vs international. Journal of Engineering, Design and Technology, 3(02), 155–63.

Arif, M, Egbu, C, Haleem, A, Kulonda, D and Khalfan, M (2009) State of green construction in India: drivers and challenges. Journal of Engineering, Design and Technology, 7(02), 223–34.

Ashcroft, D, Egbelakin, T, Jing, J and Rasheed, E O (2019) Cost comparison of seismic damage resisting systems for modules in multi-storey buildings. Journal of Engineering, Design and Technology, 17(02), 330–46.

Awodele, O A, Aghimien, D O, Akinkunmi, O G and Aigbavboa, C O (2019) Labour-only procurement. Journal of Engineering, Design and Technology, 17(02), 347–61.

Ayadi, A, Nasraoui, H, Driss, Z, Bouabidi, A and Abid, M S (2018) Unsteady state of a solar chimney power plant accoupled with a turbine: case study. Journal of Engineering, Design and Technology, 16(02), 244–55.

Barari, A, Ganjavi, B, Jeloudar, M G and Domairry, G (2010) Assessment of two analytical methods in solving the linear and nonlinear elastic beam deformation problems. Journal of Engineering, Design and Technology, 8(02), 127–45.

Bowen, P, Cattell, K, Michell, K and Edwards, P (2008) Job satisfaction of South Africa quantity surveyors: Are employers happier than employees?. Journal of Engineering, Design and Technology, 6(02), 124–44.

Bulsara, M A, Hingu, A D and Vaghasiya, P S (2016) Energy loss due to unbalance in rotor–shaft system. Journal of Engineering, Design and Technology, 14(02), 277-85.

Chan, A P C, Wong, J M W and Chiang, Y H (2003) Modelling Labour Demand at Project Level — An Empirical Study in Hong Kong. Journal of Engineering, Design and Technology, 1(02), 135–50.

Chileshe, N and Dzisi, E (2012) Benefits and barriers of construction health and safety management (HSM): Perceptions of practitioners within design organisations. Journal of Engineering, Design and Technology, 10(02), 276-98.

Chileshe, N and Haupt, T C (2010) An empirical analysis of factors impacting career decisions in South African construction industry: Male and female high school students' perspectives. Journal of Engineering, Design and Technology, 8(02), 221–39.

Chileshe, N and Haupt, T C (2005) Modelling critical success factors of construction project management (CPM). Journal of Engineering, Design and Technology, 3(02), 140–54.

Chow, W K and Chan, L Y (2011) Possibility of using water mist fire suppression system in Hong Kong. Journal of Engineering, Design and Technology, 9(02), 157–63.

Collinge, W H (2017) Client requirement representations and transformations in construction project design. Journal of Engineering, Design and Technology, 15(02), 222-41.

Ding, Z, Ng, F and Wang, J (2014) Testing trust scale measurement invariance in project teams. Journal of Engineering, Design and Technology, 12(02), 209-22.

Edwards, D J and Holt, G D (2009) Construction plant and equipment management research: thematic review. Journal of Engineering, Design and Technology, 7(02), 186–206.

Edwards, D J, Cabahug, R R and Nicholas, J (2003) The Impact of Training and Education Characteristics Upon Plant Operator Maintenance Proficiency. Journal of Engineering, Design and Technology, 1(02), 119–34.

Edwards, D J, Yang, J, Wright, B C and Love, P E D (2007) Establishing the link between plant operator performance and personal motivation. Journal of Engineering, Design and Technology, 5(02), 173–87.

El-Medany, W M (2014) A cost-effective programmable SoC for network security using Xilinx Spartan 3AN FPGA. Journal of Engineering, Design and Technology, 12(02), 280-91.

Emmitt, S (2005) Integrating teaching and research in an architectural technology undergraduate model. Journal of Engineering, Design and Technology, 3(02), 164–79.

Emuze, F, Smallwood, J and Han, S (2014) Factors contributing to non-value adding activities in South African construction. Journal of Engineering, Design and Technology, 12(02), 223-43.

Fadiya, O, Georgakis, P, Chinyio, E and Nwagboso, C (2015) Decision-making framework for selecting ICT-based construction logistics systems. Journal of Engineering, Design and Technology, 13(02), 260-81.

Famiyeh, S, Amoatey, C T, Adaku, E and Agbenohevi, C S (2017) Major causes of construction time and cost overruns: A case of selected educational sector projects in Ghana. Journal of Engineering, Design and Technology, 15(02), 181-98.

Ganah, A A (2003) The Use of Computer Visualisation in Communicating Constructability Information in UK. Journal of Engineering, Design and Technology, 1(02), 151–67.

Ghiasi, V, Ghiasi, S and Prasad, A (2012) Evaluation of tunnels under squeezing rock condition. Journal of Engineering, Design and Technology, 10(02), 168-79.

Goyal, S, Routroy, S and Singhal, A (2019) Analyzing environment sustainability enablers using fuzzy DEMATEL for an Indian steel manufacturing company. Journal of Engineering, Design and Technology, 17(02), 300–29.

Griffin, B and Yang, J (2013) Design and analysis of a novel earpiece-less eyeglass frame. Journal of Engineering, Design and Technology, 11(02), 158-77.

Habibeh Valizadeh, A and Husaini b, O (2011) Overview of remote sensing techniques in earthquake prediction. Journal of Engineering, Design and Technology, 9(02), 164–77.

Hassan, A, Purnomo, M R A and Anugerah, A R (2019) Fuzzy-analytical-hierarchy process in failure mode and effect analysis (FMEA) to identify process failure in the warehouse of a cement industry. Journal of Engineering, Design and Technology , 18(02), 378–88.

Hassan, O A B and Anderstedt, R (2017) Estimation of drying time of fresh concrete slabs: a comparative study. Journal of Engineering, Design and Technology, 15(02), 134-48.

Haupt, T C and Pillay, K (2016) Investigating the true costs of construction accidents. Journal of Engineering, Design and Technology, 14(02), 373-419.

Hendrickse, C and Thurner, T W (2019) Design intervention at major technological installations. Journal of Engineering, Design and Technology, 17(02), 402–13.

Holt, G D and Goulding, J S (2014) Conceptualisation of ambiguous-mixed-methods within building and construction research. Journal of Engineering, Design and Technology, 12(02), 244-62.

Huang, J-Y and Siao, S-T (2016) Development of an integrated bionic design system. Journal of Engineering, Design and Technology, 14(02), 310-27.

Huang, W, Xu, J, Zhu, D, Liu, C, Lu, J and Lu, K (2016) Multi-objective optimization of composite two-stage vibration isolation system for sensitive equipment. Journal of Engineering, Design and Technology, 14(02), 343-61.

Ibrahim, Y M, Ibrahim, A M and Kabir, B (2009) Geographic diversification, performance, and the risk profile of UK construction firms. Journal of Engineering, Design and Technology, 7(02), 171–85.

Ikediashi, D I and Ogwueleka, A C (2016) Assessing the use of ICT systems and their impact on construction project performance in the Nigerian construction industry. Journal of Engineering, Design and Technology, 14(02), 252-76.

Ismaila, S O and Samuel, T M (2014) Human-centered engineering: the challenges of Nigerian engineer. Journal of Engineering, Design and Technology, 12(02), 195-208.

Jaafar, M and Aziz, A R A (2008) Entrepreneurship education in developing country: Exploration on its necessity in the construction programme. Journal of Engineering, Design and Technology, 6(02), 178–89.

Jayaram, S (2010) Design of template to fabricate magnetic torquer coils for nano and picosatellite missions. Journal of Engineering, Design and Technology, 8(02), 158–67.

Jr, A C L and Melhado, S B (2014) Scope of design for production of wall partitions. Journal of Engineering, Design and Technology, 12(02), 263-79.

Kakitahi, J M, Alinaitwe, H M, Landin, A and Mone, S J (2016) Impact of construction-related rework on selected Ugandan public projects. Journal of Engineering, Design and Technology, 14(02), 238-51.

Kamal, E M and Flanagan, R (2012) Understanding absorptive capacity in Malaysian small and medium sized (SME) construction companies. Journal of Engineering, Design and Technology, 10(02), 180-98.

Karimi, H, Danesh Ashtiani, H A and Aghanajafi, C (2019) Study of mixed materials heat exchanger using optimization techniques. Journal of Engineering, Design and Technology, 17(02), 414–33.

Khalaf, A B, Hamam, Y, Alayli, Y and Djouani, K (2013) The effect of maintenance on the survival of medical equipment. Journal of Engineering, Design and Technology, 11(02), 142-57.

Khatib, J M, Chileshe, N and Sloan, S (2007) Antecedents and benefits of 3D and 4D modelling for construction planners. Journal of Engineering, Design and Technology, 5(02), 159–72.

Khorshid, E, Alfadli, A and Falah, A (2018) Application of constraint infeasibility detection methods in engineering design problems. Journal of Engineering, Design and Technology, 16(02), 285–312.

Kim, W-S, Tam, N M and Jung, D-H (2005) Experimental study on strength of cement stabilized clay. Journal of Engineering, Design and Technology, 3(02), 116–26.

Kwofie, T E, Aigbavboa, C O and Thwala, W D (2019) Measures to improve the adoption of life cycle assessment in the South African construction industry. Journal of Engineering, Design and Technology , 18(02), 480–94.

Lam, P T I, Wong, F K W and Wong, F W H (2007) Building features and site-specific factors affecting buildability in Hong Kong. Journal of Engineering, Design and Technology, 5(02), 129–47.

Liu, Y, Zhao, J, Dimitrov, V, Irish, A, Jones, C, Kirk, S, Thomas, J and Welter, D (2010) An entertaining robot prototype for pets. Journal of Engineering, Design and Technology, 8(02), 189–205.

Machika, P (2007) Access to success: The value of bridging programmes in engineering at the University of Johannesburg. Journal of Engineering, Design and Technology, 5(02), 120–8.

Madhlopa, A (2016) Effect of controlling airflow in a solar chimney on thermal load in a built environment. Journal of Engineering, Design and Technology, 14(02), 286-309.

Mañelele, I and Muya, M (2008) Risk identification on community-based construction projects in Zambia. Journal of Engineering, Design and Technology, 6(02), 145–61.

Manthe, M and Smallwood, J (2007) The appropriateness of built environment tertiary education: Perspectives of academics and postgraduate students. Journal of Engineering, Design and Technology, 5(02), 102–19.

Marinelli, M and Salopek, M (2019) Joint risk management and collaborative ethos. Journal of Engineering, Design and Technology , 18(02), 343–61.

Mathews, M (2013) BIM collaboration in student architectural technologist learning. Journal of Engineering, Design and Technology, 11(02), 190-206.

Mellal, L and Djebabra, M (2015) Contribution of cost-benefit analysis to optimization of eco-design plants. Journal of Engineering, Design and Technology, 13(02), 334-46.

Miller, S, Haupt, T C and Chileshe, N (2005) Student perceptions of the first year civil engineering course content. Journal of Engineering, Design and Technology, 3(02), 180–9.

Mostafaeipour, A, Qolipour, M, Rezaei, M and Goudarzi, H (2019) Techno-economic assessment of using wind power system for tribal region of Gachsaran in Iran. Journal of Engineering, Design and Technology , 18(02), 293–307.

Murphy, M E, Perera, R S and Heaney, S G (2008) Building design innovation: Expansion of classification linkages through case study analysis. Journal of Engineering, Design and Technology, 6(02), 99–111.

Murphy, M E, Perera, R S and Heaney, S G (2008) Building design innovation: Expansion of classification linkages through case study analysis. Journal of Engineering, Design and Technology, 6(02), 99–111.

Navarro-Astor, E, Román-Onsalo, M and Infante-Perea, M (2017) Women’s career development in the construction industry across 15 years: main barriers. Journal of Engineering, Design and Technology, 15(02), 199-221.

Nzekwe-Excel, C, Nwagboso, C, Georgakis, P and Proverbs, D (2010) Integrated framework for satisfaction assessment in construction sector. Journal of Engineering, Design and Technology, 8(02), 168–88.

Oduori, M and Mbuya, T (2009) Wire rope selection for manual winch application. Journal of Engineering, Design and Technology, 7(02), 207–22.

Oduori, M F, Mutuli, S M and Munyasi, D M (2015) Analysis of the single toggle jaw crusher kinematics. Journal of Engineering, Design and Technology, 13(02), 213-39.

Ogbu, C P and Adindu, C C (2019) Direct risk factors and cost performance of road projects in developing countries. Journal of Engineering, Design and Technology , 18(02), 326–42.

Ogunyanda, K, Fritz, W and van Zyl, R (2015) PSIM simulations of a DC SQUID magnetometer. Journal of Engineering, Design and Technology, 13(02), 298-314.

Ojolo, S J, Damisa, O, Orisaleye, J I and Ogbonnaya, C (2010) Design and development of cashew nut shelling machine. Journal of Engineering, Design and Technology, 8(02), 146–57.

Oke, A E and Aghimien, D O (2018) Drivers of value management in the Nigerian construction industry. Journal of Engineering, Design and Technology, 16(02), 270–84.

Olabanji, O M and Mpofu, K (2019) Adopting hybridized multicriteria decision model as a decision tool in engineering design. Journal of Engineering, Design and Technology , 18(02), 451–79.

Oloke, D A, Edwards, D J and Thorpe, T A (2003) Predicting Construction Plant Breakdown Time Using Time Series Modelling. Journal of Engineering, Design and Technology, 1(02), 202–21.

Omar, I and Mncwango, S (2005) Sanitary landfill energy harnessing and applications. Journal of Engineering, Design and Technology, 3(02), 127–39.

Omopariola, E D, Windapo, A, Edwards, D J and Thwala, W D (2019) Contractors’ perceptions of the effects of cash flow on construction projects. Journal of Engineering, Design and Technology , 18(02), 308–25.

Onitiri, M A and Adedayo, S M (2015) Compressive behaviour of polypropylene filled with iron ore tailings. Journal of Engineering, Design and Technology, 13(02), 198-212.

Opoku, A and Mills, S A (2019) Exploring the use of standardised design in addressing the shortage of primary school places in the UK. Journal of Engineering, Design and Technology, 17(02), 383–401.

Othman, A A E and Abdelrahim, S M (2019) Achieving sustainability through reducing construction waste during the design process. Journal of Engineering, Design and Technology, 18(02), 362–77.

Owusu-Manu, D-G, Edwards, D J, Kutin-Mensah, E K, Kilby, A, Parn, E and Love, P E (2017) The impact of socio-political and economic environments on private sector participation in energy infrastructure delivery in Ghana. Journal of Engineering, Design and Technology, 15(02), 166-80.

Owusu-Manu, D, John Edwards, D, Pärn, E A, Antwi-Afari, M F and Aigbavboa, C (2018) The knowledge enablers of knowledge transfer: a study in the construction industries in Ghana. Journal of Engineering, Design and Technology, 16(02), 194–210.

Oyedele, L O, Tham, K W, Jaiyeoba, B E and Fadeyi, M O (2003) Model for Predicting Architect's Performance in Building Delivery Process. Journal of Engineering, Design and Technology, 1(02), 168–86.

Oyewobi, L O, Abiola-Falemu, O and Ibironke, O T (2016) The impact of rework and organisational culture on project delivery. Journal of Engineering, Design and Technology, 14(02), 214-37.

Peltola, T and Mansikkamaki, P (2007) Formable multilayer PCB structure: design and technology demonstrator. Journal of Engineering, Design and Technology, 5(02), 148–58.

Rani, S P J V and Prabha, K A (2010) Stochastic logic computation based RBFNN with adaptive hidden layer structure. Journal of Engineering, Design and Technology, 8(02), 206–20.

Reda, R, Saad, M, Ahmed, M Z and Abd-Elkader, H (2018) Monitoring joint quality: Taguchi approach and structure investigation. Journal of Engineering, Design and Technology, 16(02), 211–32.

Rethinam, A, Shivakumar, V D, Harish, L, Abhishek, M B, Ramana, G V, Madhusudana, R, Sah, R and Manjini, S (2015) Grain refinement of C-Mn steel through thermo-mechanical processing. Journal of Engineering, Design and Technology, 13(02), 282-97.

Robin, C (2011) Today's pupils, tomorrow's engineers! Pedagogy and policy: a UK perspective. Journal of Engineering, Design and Technology, 9(02), 227–41.

Sacks, A, Nisbet, A, Ross, J and Harinarain, N (2012) Life cycle cost analysis: a case study of Lincoln on the Lake. Journal of Engineering, Design and Technology, 10(02), 228-54.

Sastry, M K S and Seekumar, L (2012) Automation of real time monitoring and controlling of a marine loading arm. Journal of Engineering, Design and Technology, 10(02), 217-27.

Shafabakhsh, G A, Kashi, E and Akbari, A (2016) A comparison effect of aircraft main gear configuration on runway damages by LED and FE method. Journal of Engineering, Design and Technology, 14(02), 362-72.

Shafabakhsh, G, Kashi, E and Tahani, M (2018) Analysis of runway pavement response under aircraft moving load by FEM. Journal of Engineering, Design and Technology, 16(02), 233–43.

Simpson, K B and Sam, A (2019) Strategies for health and safety management in Ghana. Journal of Engineering, Design and Technology , 18(02), 431–50.

Singh, K K and Sinha, M K (2017) Optimization of design parameters in a cylindrical heat sink with branched fins under natural convection. Journal of Engineering, Design and Technology, 15(02), 242-53.

So, C (2017) Intuitive design: framing a software test system as a status reporting tool for business. Journal of Engineering, Design and Technology, 15(02), 149-65.

Stanley, F and Thabani, M (2011) Application of RCM for a chipping and sawing mill. Journal of Engineering, Design and Technology, 9(02), 204–26.

Stopforth, R, Proctor-Parker, C and Davrajh, S (2019) Analysis of a low-cost anthropomorphic sensory platform for the world first minibus test. Journal of Engineering, Design and Technology, 17(02), 434–55.

Styhre, A (2019) The invention of the shopping mall. Journal of Engineering, Design and Technology, 17(02), 283–99.

Styhre, A, Wikmalm, L, Ollila, S and Roth, J (2012) Sociomaterial practices in engineering work: The backtalk of materials and the tinkering of resources. Journal of Engineering, Design and Technology, 10(02), 151-67.

Sunday, J O, Olatunde, D and Oluwatoyin, I (2011) Investigation into the effects of solid lubricant on the surface characteristics of some metals during orthogonal machining. Journal of Engineering, Design and Technology, 9(02), 130–42.

Sutton, K, Williams, A, Tremain, D and Kilgour, P (2016) University entry score: Is it a consideration for spatial performance in architecture design students?. Journal of Engineering, Design and Technology, 14(02), 328-42.

Swallow, M and Zulu, S (2019) Students’ awareness and perception of the value of BIM and 4D for site health and safety management. Journal of Engineering, Design and Technology , 18(02), 414–30.

Tam, V W Y and Le, K N (2008) On using the Gaussian and hyperbolic distributions to improve quality in construction. Journal of Engineering, Design and Technology, 6(02), 112–23.

Tangwe, S l and Simon, M (2019) Quantification of the viability of residential air source heat pump water heaters as potential replacement for geysers in South Africa. Journal of Engineering, Design and Technology, 17(02), 456–70.

Trethewy, R W (2005) The effect of feedback on risk taking in the Australian construction industry. Journal of Engineering, Design and Technology, 3(02), 109–15.

Trethewy, R W and Atkinson, M (2003) Enhanced Safety, Health and Environment Outcomes Through Improved Design. Journal of Engineering, Design and Technology, 1(02), 187–201.

Verwey, I (2008) Women helping women: outcomes of a South African pilot project. Journal of Engineering, Design and Technology, 6(02), 162–77.

Vinodh, S and Aravindraj, S (2012) Axiomatic modeling of lean manufacturing system. Journal of Engineering, Design and Technology, 10(02), 199-216.

Vinodh, S and Ravikumar, R (2012) Application of probabilistic finite element analysis for crane hook design. Journal of Engineering, Design and Technology, 10(02), 255-75.

Vinodh, S, Arvind, K R and Rajanayagam, D (2011) Development of digital product catalogue for enabling agility in a manufacturing organisation. Journal of Engineering, Design and Technology, 9(02), 143–56.

Vinodh, S, Somanaathan, M and Arvind, K R (2013) Development of value stream map for achieving leanness in a manufacturing organization. Journal of Engineering, Design and Technology, 11(02), 129-41.

Vinodh, S, Sundararaj, G, Devadasan, S R, Kuttalingam, D, Jayaprakasam, J and Rajanayagam, D (2009) Agility through the interfacing of CAD and CAM. Journal of Engineering, Design and Technology, 7(02), 143–70.

Wang, L (2018) The fuzzy in evaluation of concrete structure engineering. Journal of Engineering, Design and Technology, 16(02), 327–38.

  • Type: Journal Article
  • Keywords: Fuzzy; Concrete structure; Index of evaluating; Synthesis evaluation;
  • ISBN/ISSN: 1726-0531
  • URL: https://doi.org/10.1108/JEDT-10-2017-0102
  • Abstract:
    During the service condition of residential constructions with concrete structure, the influence of inside and exterior factors will result in different degrees of harm to concrete engineering. Therefore, it is very necessary to continue engineering work toward the concrete structure. Therefore, the purpose of this study is to evaluate the influence of the factors on the comprehensive performance of the concrete structure engineering. Design/methodology/approach Applying a mathematics method to establish the comprehensive evaluation model of the concrete structure engineering performance, qualitative and quantitative methods were adopted for reinforced concrete structural performance analysis. Findings The key to a safe construction project is to require all bidders to submit a written safety plan with their bids. The instruction to bidders must include guidelines for an acceptable safety plan and state clearly that the substance of the safety plan will be reviewed, and its adequacy will be a determining factor in who shall be selected as the contractor. Originality/value Based on the characteristics of concrete structure, applying the analytic hierarchy process to evaluate the concrete structure engineering comprehensive performance, an evaluation index system was built. The research combines quantitative method with qualitative method evaluation was made.

Witmer, A (2019) An ethnographic justification for establishment of a contextual engineering discipline. Journal of Engineering, Design and Technology , 18(02), 389–413.

Wong, F K W, Chan, A P C, Yam, M C H, Wong, E Y S, Tse, K T C, Yip, K K C and Cheung, E (2009) Findings from a research study of construction safety in Hong Kong: Accidents related to fall of person from height. Journal of Engineering, Design and Technology, 7(02), 130–42.

Yan, L and Fu-Yan, L (2017) Investigation on influence of speed on rolling resistance of belt conveyor based on viscoelastic property of rubber. Journal of Engineering, Design and Technology, 15(02), 254-67.

Yirenkyi-Fianko, A B and Chileshe, N (2015) An analysis of risk management in practice: the case of Ghana’s construction industry. Journal of Engineering, Design and Technology, 13(02), 240-59.

Zainab, R, David, J E, Gary, D H and Tony, T (2011) Data flow analysis of plant and equipment health and safety management. Journal of Engineering, Design and Technology, 9(02), 178–203.

Zheng, P and Dai, G (2013) A comparative study on static properties of a three-main-truss and three-cable-plane cable-stayed bridge. Journal of Engineering, Design and Technology, 11(02), 207-20.

Zhou, B, Xue, Y, Li, M, Li, Z, Zhang, X and Tao, Y (2018) Longitudinal jet ventilation calculation and application of long highway tunnel. Journal of Engineering, Design and Technology, 16(02), 256–69.

Zulu, S and Muleya, F (2019) A student perspective of ethics in the Zambian construction industry. Journal of Engineering, Design and Technology, 17(02), 266–82.