Abstracts – Browse Results
Click on the titles below to expand the information about each abstract.
Viewing 139 results ...
Abdul-Aziz, A-R (2003) Construction Entrepreneurship in Terengganu, Malaysia: An Exploration of the Influential Forces. Journal of Engineering, Design and Technology, 1(01), 15–41.
Abdullahi, B, Ibrahim, Y M, Ibrahim, A and Bala, K (2019) Development of e-tendering evaluation system for Nigerian public sector. Journal of Engineering, Design and Technology , 18(01), 122–49.
Acheamfour, V K, Kissi, E, Adjei-Kumi, T and Adinyira, E (2019) Review of empirical arguments on contractor pre-qualification criteria. Journal of Engineering, Design and Technology , 18(01), 70–83.
Adel, J F v d, Al-Jibouri, S H, Karim, U F A and Mawdesley, M (2003) Integrated Foundation Design of Buildings: Case Demonstration of a Prototype Expert System. Journal of Engineering, Design and Technology, 1(01), 55–74.
Aderinlewo, O and Alade, G A (2014) Reliability-based analysis and design of steel frames with different supports. Journal of Engineering, Design and Technology, 12(01), 39-52.
Adu, E T and Opawole, A (2019) Assessment of performance of teamwork in construction projects delivery in South-Southern Nigeria. Journal of Engineering, Design and Technology , 18(01), 230–50.
Alabi, A G F, Ajiboye, T K and Olusegun, H D (2010) Investigating the cutting forces in heat treated medium carbon steel when turning on a lathe machine. Journal of Engineering, Design and Technology, 8(01), 80–93.
Ali Khan, M S, Suresh, A and Ramaiah, N S (2016) Numerical study of magnetic circuit response in magneto-rheological damper. Journal of Engineering, Design and Technology, 14(01), 196-210.
Allen, C and Smallwood, J (2008) Improving construction planning through 4D planning. Journal of Engineering, Design and Technology, 6(01), 7–20.
Asad, M M, Hassan, R B, Sherwani, F, Abbas, Z, Shahbaz, M S and Soomro, Q M (2019) Identification of effective safety risk mitigating factors for well control drilling operation. Journal of Engineering, Design and Technology, 17(01), 218–29.
Asjad, M, Kulkarni, M S and Gandhi, O P (2016) Supportability issues of mechanical systems for their useful life. Journal of Engineering, Design and Technology, 14(01), 33-53.
Augenbroe, G, Castro, D and Ramkrishnan, K (2009) Decision model for energy performance improvements in existing buildings. Journal of Engineering, Design and Technology, 7(01), 21–36.
Austin, S A, Thorpe, A, Root, D, Thomson, D and Hammond, J (2007) Integrated collaborative design. Journal of Engineering, Design and Technology, 5(01), 7–22.
Ayodele, O L, Sanusi, K O and Kahn, M T (2019) Nuclear battery: a source of environmentally friendly energy. Journal of Engineering, Design and Technology, 17(01), 172–82.
Aziz, A R A, Yi, H S and Jaafar, M (2006) Competitive resources of private housing developers: the Malaysian perspective. Journal of Engineering, Design and Technology, 4(01), 71–80.
Bichard, E (2009) The application of sustainable behaviour change strategies in three built environment companies. Journal of Engineering, Design and Technology, 7(01), 7–20.
Boustras, G, Bratskas, R, Tokakis, V and Efstathiades, A (2011) Safety awareness of practitioners in the Cypriot manufacturing sector. Journal of Engineering, Design and Technology, 9(01), 19–31.
Bullen, P and Love, P (2011) Factors influencing the adaptive re-use of buildings. Journal of Engineering, Design and Technology, 9(01), 32–46.
Butler, L J and Bright, G (2010) Control strategy for a mobile self-balancing materials handling platform. Journal of Engineering, Design and Technology, 8(01), 6–27.
Cardoso, A F S P and Torkkeli, M (2014) Innovation in footwear companies – does it pay off?. Journal of Engineering, Design and Technology, 12(01), 128-54.
Carswell, A T and Smith, S (2009) The greening of the multifamily residential sector. Journal of Engineering, Design and Technology, 7(01), 65–80.
Chen, H-Y, Chang, Y-M and Chang, H-C (2016) A numerical definition-based systematic design approach for coupling consumers' image perception with product form. Journal of Engineering, Design and Technology, 14(01), 134-59.
Chileshe, N (2007) Quality management concepts, principles, tools and philosophies: A valid methodology for deployment within UK construction-related SMEs. Journal of Engineering, Design and Technology, 5(01), 49–67.
Chileshe, N and Haupt, T C (2010) The effect of age on the job satisfaction of construction workers. Journal of Engineering, Design and Technology, 8(01), 107–18.
Chinyio, E, Suresh, S and Salisu, J B (2018) The impacts of monetary rewards on public sector employees in construction: A case of Jigawa state in Nigeria. Journal of Engineering, Design and Technology, 16(01), 125-42.
Dadzie, J, Runeson, G and Ding, G (2019) Assessing determinants of sustainable upgrade of existing buildings. Journal of Engineering, Design and Technology , 18(01), 270–92.
Dang, C N and Le-Hoai, L (2016) Critical success factors for implementation process of design-build projects in Vietnam. Journal of Engineering, Design and Technology, 14(01), 17-32.
Deepak, B B V L, Bahubalendruni, R M V A, Rao, C A and Nalini, J (2017) Computer aided weld seam tracking approach. Journal of Engineering, Design and Technology, 15(01), 31-43.
Desta, S, Root, D and Diederichs, C J (2006) The practice of project management office (PMO) concept within the German architect, engineer, contractor (AEC) sector. Journal of Engineering, Design and Technology, 4(01), 46–59.
Dhandapani, K and Sathi, R R (2011) Embedded controlled low-frequency AC to high-frequency AC converter fed induction heater. Journal of Engineering, Design and Technology, 9(01), 7–18.
Duksh, Y S, Kaushik, B K, Sarkar, S and Singh, R (2013) Analysis of propagation delay and power with variation in driver size and number of shells in multi walled carbon nanotube interconnects. Journal of Engineering, Design and Technology, 11(01), 19-33.
Edwards, D J and Holt, G D (2008) Construction workers' health and safety knowledge: Initial observations on some test-result data. Journal of Engineering, Design and Technology, 6(01), 65–80.
Edwards, D J, Owusu-Manu, D-G, Baiden, B, Badu, E and Love, P E (2017) Financial distress and highway infrastructure delays. Journal of Engineering, Design and Technology, 15(01), 118-32.
Emetere, M E (2019) A modified approach to estimating thermodynamic impact on buildings. Journal of Engineering, Design and Technology, 17(01), 115–35.
English, J and Hay, P (2015) Black South African women in construction: cues for success. Journal of Engineering, Design and Technology, 13(01), 144-64.
English, J, Haupt, T C and Smallwood, J J (2006) Women, construction and health and safety (H&S): South African and Tanzanian perspectives. Journal of Engineering, Design and Technology, 4(01), 18–28.
Fernando, N G, Amaratunga, D and Haigh, R (2014) The career advancement of the professional women in the UK construction industry: The career success factors. Journal of Engineering, Design and Technology, 12(01), 53-70.
Fore, S and Mbohwa, C (2015) Greening manufacturing practices in a continuous process industry: Case study of a cement manufacturing company. Journal of Engineering, Design and Technology, 13(01), 94-122.
Frödell, M, Josephson, P-E and Lindahl, G (2008) Swedish construction clients' views on project success and measuring performance. Journal of Engineering, Design and Technology, 6(01), 21–32.
Georgiou, A, Haritos, G, Fowler, M and Imani, Y (2016) Advanced phase powertrain design attribute and technology value mapping. Journal of Engineering, Design and Technology, 14(01), 115-33.
Gharehbaghi, K and McManus, K (2019) TIS condition monitoring using ANN integration: an overview. Journal of Engineering, Design and Technology, 17(01), 204–17.
Ghiasi, V, Omar, H, Huat, B B K, Muniandi, R and Yusof, Z B M (2011) Risk management overview of tunnels using numerical modelling. Journal of Engineering, Design and Technology, 9(01), 110–24.
Gibb, A, Hide, S, Haslam, R, Gyi, D, Pavitt, T, Atkinson, S and Duff, R (2005) Construction tools and equipment – their influence on accident causality. Journal of Engineering, Design and Technology, 3(01), 12–23.
Gibb, A, Hide, S, Haslam, R, Gyi, D, Pavitt, T, Atkinson, S and Duff, R (2005) Construction tools and equipment ? their influence on accident causality. Journal of Engineering, Design and Technology, 3(01), 12–23.
Gudem, M, Steinert, M, Welo, T and Leifer, L (2013) Redefining customer value in lean product development design projects. Journal of Engineering, Design and Technology, 11(01), 71-89.
Haldenwang, R, Slatter, P and Pearce, C (2006) Integration of project management skills to manage a fourth year research project. Journal of Engineering, Design and Technology, 4(01), 60–70.
Harinarain, N and Haupt, T C (2016) Mission: studio based learning in construction. The University of KwaZulu-Natal case study. Journal of Engineering, Design and Technology, 14(01), 160-81.
Harran, M (2011) Dominant feedback practices: shaping engineer literacy perceptions. Journal of Engineering, Design and Technology, 9(01), 85–109.
Harran, M and Theunissen, H W (2019) Navigating the engineering literacy divide: design report collaboration practice realities. Journal of Engineering, Design and Technology, 17(01), 77–101.
Hashim, N I and Chileshe, N (2012) Major challenges in managing multiple project environments (MPE) in Australia's construction industry. Journal of Engineering, Design and Technology, 10(01), 72-92.
Haupt, T and Fester, F (2012) Women-owned construction enterprises: a South African assessment. Journal of Engineering, Design and Technology, 10(01), 52-71.
Haupt, T C and Smallwood, J (2003) Hiv/Aids in Construction: Are Older Workers Aware?. Journal of Engineering, Design and Technology, 1(01), 43–54.
Hellas, M S, Chaib, R and Verzea, I (2019) Artificial intelligence treating the problem of uncertainty in quantitative risk analysis (QRA). Journal of Engineering, Design and Technology , 18(01), 40–54.
Holt, G D and Goulding, J S (2017) PROD2UCT: an outcome-oriented dissertation study model for construction engineering students. Journal of Engineering, Design and Technology, 15(01), 104-17.
Hsu, Y (2017) Design-oriented strategy typology and innovation framework. Journal of Engineering, Design and Technology, 15(01), 13-30.
Hulio, Z H and Jiang, W (2019) An assessment of effects of non-stationary operational conditions on wind turbine under different wind scenario. Journal of Engineering, Design and Technology , 18(01), 102–21.
Ibn Majdoub Hassani, Z, El Barkany, A, Jabri, A, El Abbassi, I and Darcherif, A M (2019) Hybrid approach for solving the integrated planning and scheduling production problem. Journal of Engineering, Design and Technology , 18(01), 172–89.
Ibrahim, Y M (2010) On the measurement of work in progress using computer vision: a computerised reporting model. Journal of Engineering, Design and Technology, 8(01), 45–63.
Idoro, G (2012) Comparing levels of use of project plans and performance of traditional contract and design-build construction projects in Nigeria. Journal of Engineering, Design and Technology, 10(01), 7-33.
Ikuabe, M O and Oke, A E (2019) Contractors’ opportunism: construction professionals’ awareness of influencing factors. Journal of Engineering, Design and Technology, 17(01), 102–14.
Ilozor, B D (2008) Architectural and building features disparity and preservation of structural and fabrics integrity. Journal of Engineering, Design and Technology, 6(01), 33–47.
Ilozor, B D and Ilozor, D B (2005) Open-plan attributes and effective facilities management. Journal of Engineering, Design and Technology, 3(01), 1–11.
Jacobs, C and Jacobs, K (2003) An Integrated Approach to Curriculum at Foundation Level. Journal of Engineering, Design and Technology, 1(01), 89–101.
Jacobs, C and Miller, S (2003) An Integrated Approach to Project Work - an Exploration of Assessment Practices from Lecturer Perspectives. Journal of Engineering, Design and Technology, 1(01), 75–87.
Jarkas, A (2012) Factors influencing power-trowelling productivity of concrete surface floors. Journal of Engineering, Design and Technology, 10(01), 34-51.
Jarkas, A M and Haupt, T C (2015) Major construction risk factors considered by general contractors in Qatar. Journal of Engineering, Design and Technology, 13(01), 165-94.
Jay, C I and Bowen, P A (2015) Value management and innovation: A historical perspective and review of the evidence. Journal of Engineering, Design and Technology, 13(01), 123-43.
Jayaram, S and Gonzalez, E (2011) Design and construction of a low-cost economical thermal vacuum chamber for spacecraft environmental testing. Journal of Engineering, Design and Technology, 9(01), 47–62.
Kahoul, H, Belhour, S, Bellaouar, A and Dron, J P (2019) Fatigue life prediction of upper arm suspension using strain life approach. Journal of Engineering, Design and Technology, 17(01), 25–40.
Kaur, G, Singh, M L and Patterh, M S (2010) Analysis of significant factors in DWDM optical communication systems. Journal of Engineering, Design and Technology, 8(01), 28–44.
Khesal, T, Saghaei, A, Khalilzadeh, M, Rahiminezhad Galankashi, M and Soltani, R (2019) Integrated cost, quality, risk and schedule control through earned value management (EVM). Journal of Engineering, Design and Technology, 17(01), 183–203.
Kiyang, S T and Zyl, R V (2014) Empirical investigation of wireless sensor network performance in noisy environments. Journal of Engineering, Design and Technology, 12(01), 29-38.
Kulkarni, S, Chapman, C, Shah, H, Parn, E A and Edwards, D J (2018) Designing an efficient tidal turbine blade through bio-mimicry: a systematic review. Journal of Engineering, Design and Technology, 16(01), 101-24.
Kulkarni, S, Edwards, D J, Chapman, C, Hosseini, M R and Owusu-Manu, D (2019) A preliminary mechanical design evaluation of the Wikispeed car: for light-weighting implications. Journal of Engineering, Design and Technology, 17(01), 230–49.
Kumar, S, Dhingra, A and Singh, B (2018) Lean-Kaizen implementation: A roadmap for identifying continuous improvement opportunities in Indian small and medium sized enterprise. Journal of Engineering, Design and Technology, 16(01), 143-60.
Li, Z and Tong, X (2017) Applications of the discrete element method and Fibonacci sequence on a banana screen. Journal of Engineering, Design and Technology, 15(01), 12-18.
Lindén, S and Josephson, P-E (2013) In-housing or out-sourcing on-site materials handling in housing?. Journal of Engineering, Design and Technology, 11(01), 90-106.
Loganathan, M K and Gandhi, O P (2015) Reliability evaluation and analysis of CNC cam shaft grinding machine. Journal of Engineering, Design and Technology, 13(01), 37-73.
Luo, Z, Chen, Y, Cen, K, Pan, H, Zhong, M and He, J (2019) Research on comprehensive environmental impact assessment of shale gas development. Journal of Engineering, Design and Technology , 18(01), 1–20.
Mahamadu, A-M, Manu, P, Booth, C, Olomolaiye, P, Coker, A, Ibrahim, A and Lamond, J (2018) Infrastructure procurement skills gap amongst procurement personnel in Nigeria’s public sector. Journal of Engineering, Design and Technology, 16(01), 2-24.
Maleetipwan-Mattsson, P, Laike, T and Johansson, M (2017) The effects of user interface designs on lighting use. Journal of Engineering, Design and Technology, 15(01), 58-78.
Mamphweli, N S and Meyer, E L (2013) Performance monitoring system for a biomass gasifier. Journal of Engineering, Design and Technology, 11(01), 7-18.
Maritz, M J and Hattingh, V (2015) Electronic communication in the construction industry. Journal of Engineering, Design and Technology, 13(01), 74-93.
Martin, L and Root, D (2010) Emerging contractors in South Africa: interactions and learning. Journal of Engineering, Design and Technology, 8(01), 64–79.
Megahed, N (2018) Reflections on studio-based learning: assessment and critique. Journal of Engineering, Design and Technology, 16(01), 63-80.
Mengistu, D G and Mahesh, G (2019) Dimensions for improvement of construction management practice in Ethiopian construction industry. Journal of Engineering, Design and Technology , 18(01), 21–39.
Mollo, L (2015) Influence of cement/sand ratio on behavior of cement mortar. Journal of Engineering, Design and Technology, 13(01), 23-36.
Muga, H E, Mukherjee, A, Mihelcic, J R and Kueber, M J (2009) An integrated assessment of continuously reinforced and jointed plane concrete pavements. Journal of Engineering, Design and Technology, 7(01), 81–98.
Muramatsu, M and Kato, T (2019) Selection guide of multi-objective optimization for ergonomic design. Journal of Engineering, Design and Technology, 17(01), 2–24.
Musonda, I and Smallwood, J (2008) Health and safety awareness and implementation in Botswana's construction industry. Journal of Engineering, Design and Technology, 6(01), 81–90.
Muthukumaran, V, kumar, M S and Selladurai, V (2013) Improvement of surface properties of AISI 316L SS by oxygen and helium ion implantation. Journal of Engineering, Design and Technology, 11(01), 34-43.
- Type: Journal Article
- Keywords: AISI 316L stainless steel; corrosion; hardness; ion implantation; SEM; stainless steel
- ISBN/ISSN: 1726-0531
- URL: https://doi.org/10.1108/17260531311309116
- Abstract:
Purpose – The purpose of the paper is to study effect of the implantation of oxygen and helium ions on the corrosion performance of the AISI3l6L stainless steel. It presents useful new results which allows one to draw conclusions as to the suitability of the helium and oxygen ion implanted AISI 316L stainless steel for biomedical use in the body. Design/methodology/approach – The implantation of oxygen and helium ions was done on AISI 316L SS at an energy levePurpose – The purpose of the paper is to study effect of the implantation of oxygen and helium ions on the corrosion performance of the AISI3l6L stainless steel. It presents useful new results which allows one to draw conclusions as to the suitability of the helium and oxygen ion implanted AISI 316L stainless steel for biomedical use in the body. Design/methodology/approach – The implantation of oxygen and helium ions was done on AISI 316L SS at an energy level of 100 keV at a dose of 1×1017 ions/cm2, at room temperature. In order to simulate the natural tissue environment, an electrochemical test using cyclic polarization was done in a 0.9 percent sodium chloride solution at a pH value of 6.3 at 37°C. This was carried out on both the virgin and implanted AISI 316L stainless steel for the purpose of comparing performance. In addition to this, the hardness of the virgin and implanted samples was also studied using Vickers microhardness tester with varying loads. Besides, the surface morphologies of the implanted samples and the corroded samples were studied with XRD and SEM. Findings – From the study the following findings are made. First, the XRD and SEM results were found to be in accordance with the corrosion test results. Second, the general corrosion behavior showed a significant improvement in the case of both helium implanted (icorr=0.0689 mA/cm2) and oxygen implanted (icorr=1.104 mA/cm2), when compared to the virgin AISI 316L SS (icorr=1.2187 mA/cm2). The pitting corrosion showed a significant improvement for helium implanted (Epit=230 mV) when compared to virgin material (Epit=92 mV). The oxygen implanted has not shown any improvement (Epit=92 mV). The surface hardness is found to be 1202 HV for helium implanted and 1020 HV for oxygen implanted, while it is found to be 195 HV for the virgin material. The hardness of the helium and oxygen implanted samples is found to be increased by about 600 percent and 500 percent, respectively, when compared to the virgin samples. Helium implanted samples show better performance in terms of corrosion resistance and hardness when compared to those of the oxygen implanted samples. Originality/value – Although a number of authors have conducted many research on AISI 316L stainless steel, this work has original experimental results in terms of the oxygen and helium ion implantation parameters used and the specific tests: microhardness, electrochemical corrosion test, SEM and XRD that were used. It thus presents useful new results which allows one to draw conclusions as to the suitability of the Helium and Oxygen ion implanted AISI 316L stainless steel for biomedl of 100?keV at a dose of 1×1017?ions/cm2, at room temperature. In order to simulate the natural tissue environment, an electrochemical test using cyclic polarization was done in a 0.9 percent sodium chloride solution at a pH value of 6.3 at 37°C. This was carried out on both the virgin and implanted AISI 316L stainless steel for the purpose of comparing performance. In addition to this, the hardness of the virgin and implanted samples was also studied using Vickers microhardness tester with varying loads. Besides, the surface morphologies of the implanted samples and the corroded samples were studied with XRD and SEM. Findings – From the study the following findings are made. First, the XRD and SEM results were found to be in accordance with the corrosion test results. Second, the general corrosion behavior showed a significant improvement in the case of both helium implanted (icorr=0.0689?mA/cm2) and oxygen implanted (icorr=1.104?mA/cm2), when compared to the virgin AISI 316L SS (icorr=1.2187?mA/cm2). The pitting corrosion showed a significant improvement for helium implanted (Epit=230?mV) when compared to virgin material (Epit=92?mV). The oxygen implanted has not shown any improvement (Epit=92?mV). The surface hardness is found to be 1202 HV for helium implanted and 1020 HV for oxygen implanted, while it is found to be 195 HV for the virgin material. The hardness of the helium and oxygen implanted samples is found to be increased by about 600 percent and 500 percent, respectively, when compared to the virgin samples. Helium implanted samples show better performance in terms of corrosion resistance and hardness when compared to those of the oxygen implanted samples. Originality/value – Although a number of authors have conducted many research on AISI 316L stainless steel, this work has original experimental results in terms of the oxygen and helium ion implantation parameters used and the specific tests: microhardness, electrochemical corrosion test, SEM and XRD that were used. It thus presents useful new results which allows one to draw conclusions as to the suitability of the Helium and Oxygen ion implanted AISI 316L stainless steel for biomedical use.
Naghipour, M, Gholampour, A A and Nematzadeh, M (2013) Analytical and experimental study on damping ratio of GRP-reinforced glulam beams. Journal of Engineering, Design and Technology, 11(01), 44-58.
Neshat, N, Hadian, H and Rahimi Alangi, S (2019) Technological learning modelling towards sustainable energy planning. Journal of Engineering, Design and Technology , 18(01), 84–101.
Odubiyi, A O and Davidson, I E (2005) England and Wales electricity industry – experiences in deregulation. Journal of Engineering, Design and Technology, 3(01), 24–9.
Odubiyi, A O and Davidson, I E (2005) England and Wales electricity industry ? experiences in deregulation. Journal of Engineering, Design and Technology, 3(01), 24–9.
Ojo, L D and Ogunsemi, D R (2019) Critical drivers (CDs) of value management adoption in the Nigerian construction industry. Journal of Engineering, Design and Technology, 17(01), 250–64.
Oladapo, A A (2007) A quantitative assessment of the cost and time impact of variation orders on construction projects. Journal of Engineering, Design and Technology, 5(01), 35–48.
Oliver, N N and Brümmer, D G (2007) Factors influencing water consumption in South African schools. Journal of Engineering, Design and Technology, 5(01), 81–94.
Oloke, D, Edwards, D J, Wright, B and Love, P E D (2006) A web-based information management system for predicting the breakdown of off-highway plant. Journal of Engineering, Design and Technology, 4(01), 29–45.
Omar, I and Makhlomo, S (2003) Energy Alternatives for Water Pumping in Rural Areas - Using a Case Study Approach. Journal of Engineering, Design and Technology, 1(01), 1–14.
Opawole, A (2018) Penalty mechanisms for enforcing concessionaire performance in public–private partnership contracts in Nigeria. Journal of Engineering, Design and Technology, 16(01), 161-91.
Opawole, A and Jagboro, G O (2017) Factors affecting the performance of private party in concession-based PPP projects in Nigeria. Journal of Engineering, Design and Technology, 15(01), 44-57.
Opawole, A, Kajimo-Shakantu, K, Alao, O O and Ogbaje, C P (2019) Risk factors associated with procuring university hostel facilities through build-operate-transfer model. Journal of Engineering, Design and Technology, 17(01), 136–54.
Othman, A A E (2014) A study of the competency requirements of property development graduates to meet the qualifications of the South African construction industry. Journal of Engineering, Design and Technology, 12(01), 2-28.
Othman, A A E and Abdelwahab, N M A (2018) Achieving sustainability through integrating risk management into the architectural design process. Journal of Engineering, Design and Technology, 16(01), 25-43.
Othman, A A E and Khalil, M H (2019) Divergent heritage sustainability: a threefold approach through lean talent management. Journal of Engineering, Design and Technology , 18(01), 150–71.
Patel, T D, Haupt, T C and Bhatt, T (2019) Fuzzy probabilistic approach for risk assessment of BOT toll roads in Indian context. Journal of Engineering, Design and Technology , 18(01), 251–69.
Potbhare, V, Syal, M, Arif, M, Khalfan, M M A and Egbu, C (2009) Emergence of green building guidelines in developed countries and their impact on India. Journal of Engineering, Design and Technology, 7(01), 99–121.
Quaigrain, R A and Issa, M H (2018) Development and validation of disability management indicators for the construction industry. Journal of Engineering, Design and Technology, 16(01), 81-100.
Rajiv, P, Logesh, R, Vinodh, S and Rajanayagam, D (2014) Financial feasibility and value engineering principles integrated quality function deployment for a manufacturing organization: A case study. Journal of Engineering, Design and Technology, 12(01), 71-88.
Riahi Zaniani, J, Taghipour Ghahfarokhi, S, Jahangiri, M and Alidadi Shamsabadi, A (2019) Design and optimization of heating, cooling and lightening systems for a residential villa at Saman city, Iran. Journal of Engineering, Design and Technology, 17(01), 41–52.
Rohdin, P, Dalewski, M and Moshfegh, B (2016) Combining a survey approach and energy and indoor environment auditing in historic buildings. Journal of Engineering, Design and Technology, 14(01), 182-95.
Sathiya, P, Jaleel, M Y A and Shanmugarajan, B (2012) Analysis of metallurgical and mechanical properties of laser welded super austenitic stainless steel. Journal of Engineering, Design and Technology, 10(01), 110-27.
Shakantu, W, Tookey, D J E and Bowen, P A (2003) The Hidden Cost of Transportation of Construction Materials: An Overview. Journal of Engineering, Design and Technology, 1(01), 103–18.
Sharifi, Y and Aviz, H (2016) Effect of outrigger-belt truss location on the dynamic response of high-rise building subjected to blast loading. Journal of Engineering, Design and Technology, 14(01), 54-77.
Sharma, D K, Kaushik, B K and Sharma, R K (2011) VLSI interconnects and their testing: prospects and challenges ahead. Journal of Engineering, Design and Technology, 9(01), 63–84.
Shiue, I (2016) Future urban design strategies for health and wellbeing: Proposal of DIDID action plan and design mapping. Journal of Engineering, Design and Technology, 14(01), 104-14.
Sihabuddin, S S and Ariaratnam, S T (2009) Methodology for estimating emissions in underground utility construction operations. Journal of Engineering, Design and Technology, 7(01), 37–64.
Smallwood, J J and Haupt, T C (2007) Impact of the South African Construction Regulations on construction health and safety: Architects' perceptions. Journal of Engineering, Design and Technology, 5(01), 23–34.
Soltani, M, Aouag, H and Mouss, M D (2019) An integrated framework using VSM, AHP and TOPSIS for simplifying the sustainability improvement process in a complex manufacturing process. Journal of Engineering, Design and Technology , 18(01), 211–29.
Suleiman, M Z, Talib, R and Ramli, M (2013) Durability and flexibility characteristics of latex modified ferrocement in structural development applications. Journal of Engineering, Design and Technology, 11(01), 59-70.
Sun, Y, Djouani, K, Wyk, B J v, Wang, Z and Siarry, P (2014) Hypothesis testing-based adaptive PSO. Journal of Engineering, Design and Technology, 12(01), 89-101.
Syed Abu Bakar, S P, Jaafar, M and Muhibudin, M (2019) Intensifying business success of Malaysian housing development firms through entrepreneurial learning. Journal of Engineering, Design and Technology , 18(01), 190–210.
Tam, V W Y, Tam, C M and Ng, W C Y (2007) On prefabrication implementation for different project types and procurement methods in Hong Kong. Journal of Engineering, Design and Technology, 5(01), 68–80.
Tookey, J E, Bowen, P A, Hardcastle, C and Murray, M D (2005) Concurrent engineering: a comparison between teh aerospace and construction industries. Journal of Engineering, Design and Technology, 3(01), 44–55.
Ugwu, O O and Haupt, T C (2005) Key performance indicators for infrastructure sustainability – a comparative study between Hong Kong and South Africa. Journal of Engineering, Design and Technology, 3(01), 30–43.
Ugwu, O O and Haupt, T C (2005) Key performance indicators for infrastructure sustainability ? a comparative study between Hong Kong and South Africa. Journal of Engineering, Design and Technology, 3(01), 30–43.
Vidyadhar, R, Sudeep, K R, Vinodh, S and Antony, J (2016) Application of fuzzy logic for leanness assessment in SMEs: a case study. Journal of Engineering, Design and Technology, 14(01), 78-103.
Vinodh, S and Jayakrishna, K (2014) Development of integrated ECQFD, LCA and sustainable analysis model: A case study in an automotive component manufacturing organization. Journal of Engineering, Design and Technology, 12(01), 102-27.
Vinodh, S and Sharath, K T (2016) A case study on applying creative design concepts to brake rotor design. Journal of Engineering, Design and Technology, 14(01), 2-16.
Vinodh, S, Devadasan, S R and Shankar, C (2010) Design agility through computer aided design. Journal of Engineering, Design and Technology, 8(01), 94–106.
Vinodh, S, Kamala, V and Jayakrishna, K (2015) Application of fuzzy axiomatic design methodology for selection of design alternatives. Journal of Engineering, Design and Technology, 13(01), 2-22.
Vinodh, S, Sundararaj, G, Devadasan, S R and Rajanayagam, D (2008) Quantification of agility: An experimentation in an Indian electronics switches manufacturing company. Journal of Engineering, Design and Technology, 6(01), 48–64.
Wang, H, Shen, J and Gao, D (2019) Seismic damage of gravity abutment in liquefied ground. Journal of Engineering, Design and Technology, 17(01), 53–76.
Wang, X, Wang, X and Huang, Y (2019) Chinese construction worker reluctance toward vocational skill training. Journal of Engineering, Design and Technology, 17(01), 155–71.
Wong, J M W, Chan, A P C and Chiang, Y H (2006) The changing construction labour market: a case of Hong Kong. Journal of Engineering, Design and Technology, 4(01), 1–17.
Xia, N, Wang, X, Wang, Y, Yang, Q and Liu, X (2017) Lifecycle cost risk analysis for infrastructure projects with modified Bayesian networks. Journal of Engineering, Design and Technology, 15(01), 79-103.
Yap, J B H and Toh, H M (2019) Investigating the principal factors impacting knowledge management implementation in construction organisations. Journal of Engineering, Design and Technology , 18(01), 55–69.
Yapage, N and Liyanapathirana, S (2018) Behaviour of geosynthetic reinforced column supported embankments. Journal of Engineering, Design and Technology, 16(01), 44-62.